Instructions to load Trinity Templates into 3CX:

1.	Download the NewTemplate.zip file attached to this article.

2.	Extract the contents of the zip file into the ‘Downloads’ folder on your Windows machine.

3.	Once there, execute the .bat file
		- 3CX_Template_Move.bat
		
The template files are now added to the following Windows directories for your 3CX Phone System:

C:\ProgramData\3CX\Instance1\Data\Http\Templates\gateway
C:\ProgramData\3CX\Instance1\Data\Http\Templates\fxs

Instructions to load Trinity configurations into SmartNodes:

1-	Enter in the IP Address of your SmartNode device
2-	Click the menu button from the upper left-hand side 
3-	Select System/Configuration Files and a window will pop-up.  Click the + sign to add a new config.
4-	Browse to the file and then add it as the ‘startup-config’ and click ‘OK’.  The config will now be saved and loaded on next bootup.
5-	To reboot the device, click the menu button and select ‘Reboot’.  Answer ‘Yes’ to the pop-up window to initiate the reboot.


Your SmartNode will now be successfully configured and registered to use 3CX.


Please contact Patton Support if you have any questions.

support@patton.com





